[c-nsp] OSPF NSSA question

[Ruben Alvarez]

Hello,

I have a question.  I have recently setup a second OSPF area.  The ABR has
three routers connected to it (area 1) in a hub and spoke configuration.
The routers get a default route to the ABR via default information
originate.  Now the ABR has all the N2 routes for the three routers.  But so
do all three routers, which isn't needed.  They only have one interface and
a default route.  Is there a way I can ignore all routes in the area except
the default route coming from the ABR?