[c-nsp] standby RSP720 gets "Data TLB Error Exception" after rommon upgrade

[James Edmondson]

I would suggest SRD1 IOS, however be prepared to upgrade the firmware if you
have any SPA boards.

On Thu, Jun 4, 2009 at 2:09 PM, Tassos Chatzithomaoglou
<achatz at forthnet.gr>wrote:

> For everyone interested, bug was CSCsy92252.
> Many thanks to Arie and Andrew (@Cisco) for pointing that out.
>
> --
> Tassos
>
> Tassos Chatzithomaoglou wrote on 04/06/2009 09:20:
>
>> Has anyone managed to do a rommon upgrade to a RSP720 and immediately
>> afterwards had it boot as a standby ? I did it twice and i always got the
>> "Data TLB Error Exception" message
>>
>> rommon 7 > boot bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRB5a.bin
>>
>> Initializing ATA monitor library...
>>
>> *** Data TLB Error Exception ***
>> PC = 0x40442e4, Vector = 0x1400, SP = 0x4012dc4
>>
>>
>> I have RMAed 2 RSP720s until now after doing exactly the same procedure
>> and now i'm waiting for the 3rd one!
>>
>> If the RSP720 is the only one in the chassis (so it's acting like an
>> active), then booting after the rommon upgrade works fine! If the RSP720
>> gets booted as a standby after the rommon upgrade, then it gets destroyed
>> and cannot be used neither as an active nor as a standby.
>>
>>
>  _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
James