[c-nsp] standby RSP720 gets "Data TLB Error Exception" after rommon upgrade

[Tassos Chatzithomaoglou]

For everyone interested, bug was CSCsy92252.
Many thanks to Arie and Andrew (@Cisco) for pointing that out.

-- 
Tassos

Tassos Chatzithomaoglou wrote on 04/06/2009 09:20:
> Has anyone managed to do a rommon upgrade to a RSP720 and immediately 
> afterwards had it boot as a standby ? I did it twice and i always got 
> the "Data TLB Error Exception" message
> 
> rommon 7 > boot bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRB5a.bin
> 
> Initializing ATA monitor library...
> 
> *** Data TLB Error Exception ***
> PC = 0x40442e4, Vector = 0x1400, SP = 0x4012dc4
> 
> 
> I have RMAed 2 RSP720s until now after doing exactly the same procedure 
> and now i'm waiting for the 3rd one!
> 
> If the RSP720 is the only one in the chassis (so it's acting like an 
> active), then booting after the rommon upgrade works fine! If the RSP720 
> gets booted as a standby after the rommon upgrade, then it gets 
> destroyed and cannot be used neither as an active nor as a standby.
>