[c-nsp] ASR7401 and PA-FE-TX (ISL)

Elmar K. Bins elmi at 4ever.de
Tue Jun 9 03:14:28 EDT 2009


Re everyone and thank you for the input.

The "speed unknown" hadn't revealed itself to me _but_ I cannot
make it go away. The interface does not understand the "speed"
command:

rt(config-if)#speed ?
% Unrecognized command


The duplex does of course match on both sides - I did not see any
collision or late collision errors. The router i/f doesn't seem
capable of any kind of negotiation, at least there's no matching
command except for, maybe, "no duplex"...


I also get this from time to time:

*Jun  9 06:44:18: %SYS-3-CPUHOG: Task is running for (2004)msecs, more than (2000)msecs (0/0),process = Exec.
-Traceback= 0x608FAE9C 0x608FACB0 0x6015BA10 0x60162FC0 0x6016001C 0x6087A44C 0x60879ABC 0x6086F7A4 0x607FDF2C 0x6081BDD8 0x608BEFCC 0x608BEFB0


I wonder whether the interface is really broken (and I should
return it), or whether it's supposed to (not) work that way.

Yours,
	Elmar.

PS: Although my WS worked fine on that cable and switchport, I'll
    go swap the cable next.

PPS: IOSes tried are 12.3(14)T3 and 12.4(12)a.


More information about the cisco-nsp mailing list