[c-nsp] Non-Cisco SFPs (i.e. Finisar) in TwinGig modules on a 4900M?

[Sebastian Wiesinger]

* Mark Zipp <mark.r.zipp at gmail.com> [2009-06-09 09:33]:
> Hi,
> 
> Does anybody know if the 'service unsupported-transceiver' command is
> supported on the 4900Ms? We're intending to use Finisar 1000BaseLX
> SFPs.

I can confirm this:

NAME: "Converter 3/2", DESCR: "Converter Module"
PID: CVR-X2-SFP        , VID: V01  , SN: CAT111058P7

NAME: "GigabitEthernet3/11", DESCR: "1000BaseSX"
PID: Unspecified       , VID:      , SN: FNS11172H80

Don't forget to use

hw-module module X port-group Y select gigabitethernet

or you'll get some not-so-helpful errors (in older IOS versions).

-- 
GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
            -- Terry Pratchett, The Fifth Elephant