[c-nsp] Non-Cisco SFPs (i.e. Finisar) in TwinGig modules on a 4900M?

[Mark Zipp]

Hi Sebastian,

2009/6/9 Sebastian Wiesinger <cisco-nsp at ml.karotte.org>:
> * Mark Zipp <mark.r.zipp at gmail.com> [2009-06-09 09:33]:
>> Hi,
>>
>> Does anybody know if the 'service unsupported-transceiver' command is
>> supported on the 4900Ms? We're intending to use Finisar 1000BaseLX
>> SFPs.
>
> I can confirm this:
>
> NAME: "Converter 3/2", DESCR: "Converter Module"
> PID: CVR-X2-SFP        , VID: V01  , SN: CAT111058P7
>
> NAME: "GigabitEthernet3/11", DESCR: "1000BaseSX"
> PID: Unspecified       , VID:      , SN: FNS11172H80
>
> Don't forget to use
>
> hw-module module X port-group Y select gigabitethernet
>
> or you'll get some not-so-helpful errors (in older IOS versions).
>

Thanks very much for that info - it'll save us $000s!

Regards,
Mark.

> --
> GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20)
> 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
>            -- Terry Pratchett, The Fifth Elephant
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>