[c-nsp] MPLS/IP-VPN capable cards on Cat 6500

[Manu Chao]

Thanks Arie

On Tue, Jun 9, 2009 at 6:23 PM, Arie Vayner (avayner) <avayner at cisco.com>wrote:

>  Not that I am aware of…
>
>
>
>
> http://www.cisco.com/en/US/products/hw/switches/ps708/products_relevant_interfaces_and_modules.html
>
>
>
> Arie
>
>
>
> *From:* Manu Chao [mailto:linux.yahoo at gmail.com]
> *Sent:* Tuesday, June 09, 2009 18:54
> *To:* Arie Vayner (avayner)
> *Cc:* Marlon Duksa; cisco-nsp at puck.nether.net
>
> *Subject:* Re: [c-nsp] MPLS/IP-VPN capable cards on Cat 6500
>
>
>
> SIP400/SIP600 is 7600 only too
>
>
>
> no?
>
> On Thu, Jun 4, 2009 at 5:29 PM, Arie Vayner (avayner) <avayner at cisco.com>
> wrote:
>
> Yes, this is true, ES20 is 7600 only (I missed the 6500 angle here ;-) )
>
> We can do VPLS with SIP400 (lower BW) or SIP600 (higher BW).
>
>
>
> BTW, There is also support for MPLSoGRE
>
>
>
> Arie
>
>
>
> From: Marlon Duksa [mailto:mduksa at gmail.com]
> Sent: Thursday, June 04, 2009 17:10
> To: Arie Vayner (avayner)
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] MPLS/IP-VPN capable cards on Cat 6500
>
>
>
>
> Thanks Arie. But ES cards are not supported on Cat6500, no? And also
> VPLS over MPLS on a SIP in Cat6500 - is it supported? If so do you know
> which SIP?
>
> Thanks,
>
> Marlon
>
> On Wed, Jun 3, 2009 at 9:19 PM, Arie Vayner (avayner)
> <avayner at cisco.com> wrote:
>
> Marlon,
>
> If you have DFCs on the regular LAN cards, then EoMPLS and L3VPN will be
> done in hardware and in distributed forwarding mode.
> For VPLS, you need to have either an ES20/ES40 card or a SIP card facing
> the core. Having this card means that again VPLS is done in hardware -
> some functionality is done on the regular DFCs and some on the egress
> core facing module.
>
> Arie
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Marlon Duksa
> Sent: Thursday, June 04, 2009 02:07
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] MPLS/IP-VPN capable cards on Cat 6500
>
> Hi -Does anyone know which cards on Cat6500 support MPLS
> and separately IP-VPN, posibly at 40Gbps throughput? I'm looking for a
> distributed (DFC) forwarding solution?
>
> I know that Cat6500 is very limited in VPLS support, but IP-VPN and
> EoMPLS
> should be no problem, right?
>
> Thanks,
> Marlon
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>