[c-nsp] WLC discovery

[Shine Joseph]

Yes it is in layer 3 mode

----- Original Message ----- 
From: "Ryan West" <rwest at zyedge.com>
To: "Shine Joseph" <shinejoseph at dodo.com.au>
Cc: "Kaegler, Mike" <KaeglerM at tessco.com>; <cisco-nsp at puck.nether.net>
Sent: Thursday, June 11, 2009 5:30 AM
Subject: Re: [c-nsp] WLC discovery


Are you in Layer 2 or Layer 3 AP mode. I forget if this is the actual  
name, but you may need to switch to layer 3.

Sent from handheld.

On Jun 10, 2009, at 5:26 PM, "Shine Joseph" <shinejoseph at dodo.com.au>  
wrote:

> Thanks Mike for the the quick response.
>
> That means I have to have physical access to the APs which are already
> mounted on the ceiling.
> I am in the process of moving this AP to another subnet and I have  
> some 18
> of them to be moved from a single subnet to different subnets.
>
> I can see this AP regsiters momentarily and de-registers. We are  
> running
> code 5.1.
>
> When the AP regsiters I can go to its configuration page and I see  
> Hardware
> reset and Reset to Factory defaults.
>
> Any help is appreciated.
>
> Thanks,
> Shine
> ----- Original Message -----
> From: "Kaegler, Mike" <KaeglerM at tessco.com>
> To: "Shine Joseph" <shinejoseph at dodo.com.au>; <cisco-nsp at puck.nether.net 
> >
> Sent: Thursday, June 11, 2009 4:50 AM
> Subject: Re: [c-nsp] WLC discovery
>
>
>> Boot the AP with the Mode button down to reset its parameter memory.
>> If that doesn't help, hook into console and watch the messages.
>> If that doesn't help, execute some 'debug [...]' statements on the  
>> same
>> console.
>> -porkchop
>>
>>
>> On 6/10/09 4:42 PM, "Shine Joseph" <shinejoseph at dodo.com.au> wrote:
>>
>>> Hi,
>>>
>>> A Cisco WLC4402 is configured and working alright. All of the APs
>>> currently
>>> are in the same subnet and hence the discovery do not require DHCP  
>>> Option
>>> 43
>>> or DNS. I want to add another AP that is in a different. When the AP
>>> tries to
>>> register with the WLC, it registers momentarily and un registers.  
>>> This
>>> has
>>> happened for eithe DHCP option and DNS discovery.
>>>
>>> I am sure, there is something I have not done to get this working.  
>>> Can
>>> anyone
>>> suggest somthing that I should try?
>>>
>>> Thanks in advance,
>>>
>>> Shine
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>>
>> -- 
>> Michael Kaegler, TESSCO Technologies: Engineering, 410 229 1295
>> Your wireless success, nothing less. http://www.tessco.com/
>>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/