[c-nsp] need help with 6509-E with WS-SUP32-GE-3B

Cory Ayers cayers at ena.com
Wed Jun 10 19:08:06 EDT 2009

> Check the config-register, as Aaron suggests, but also check the SP's
> config-register.
> #remote command switch show boot
> If the RP shows 0x2102 but the SP is something else, that could be the
> problem. To fix, go into config mode on the RP and re-enter the 0x2102
> config-register, ^Z, then write mem.
> Cheers,
> Dale

While looking at show boot, you should also verify the boot variable.
It may be necessary to explicitly specify the image filename.
show boot
BOOT variable =

show star | i ^boot
boot system flash disk0:c7600s72033-advipservicesk9-mz.122-33.SRC2.bin
boot system flash 

More information about the cisco-nsp mailing list