[c-nsp] MetroEthernet Switches

[Arie Vayner (avayner)]

Mohammad,

I would assume that the power adaptor is there in order to feed the
AN-80i with power, as the ME-C3750-24TE switches are not PoE enabled. If
you remove it, I guess the AN-80i will not get power, and would not
work...

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mohammad Khalil
Sent: Thursday, June 11, 2009 10:21
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] MetroEthernet Switches


Hey all , 
we have ME-C3750-24TE switches
and we are using a product named redline for broadband lesaed lines 
we are using power adapters between the redline and the switch port
if i connect the redline directly to the switch port , am i going to
face any failure ???
Input Power
The AN-80i is powered by the PoE power injector available in 90-264 VAC
(50/60 Hz) or +/- 18-60 VDC versions.

Thanks in advance,

_________________________________________________________________
Show them the way! Add maps and directions to your party invites. 
http://www.microsoft.com/windows/windowslive/products/events.aspx
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/