[c-nsp] MetroEthernet Switches

[Ved Labs]

Will you be using the DC to DC convertor and use the RPS port for the same ,

On Thu, Jun 11, 2009 at 12:51 PM, Mohammad Khalil <eng_mssk at hotmail.com>wrote:

>
> Hey all ,
> we have ME-C3750-24TE switches
> and we are using a product named redline for broadband lesaed lines
> we are using power adapters between the redline and the switch port
> if i connect the redline directly to the switch port , am i going to face
> any failure ???
> Input Power
> The AN-80i is powered by the PoE power injector available in 90-264 VAC
> (50/60 Hz) or +/- 18-60 VDC versions.
>
> Thanks in advance,
>
> _________________________________________________________________
> Show them the way! Add maps and directions to your party invites.
> http://www.microsoft.com/windows/windowslive/products/events.aspx
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>