[c-nsp] ASA 5510 Configuration Replication Failure

[Jeff Wojciechowski]

Ryan -

Solved... for now at least...

Still using straight thru cable for synch interface I upgraded to 8.21 - based on the following bug IDs:

CSCsu88174
CSCsw98373
CSCsy21727
CSCsz63217

For the record the sh run | inc fail:

failover lan unit primary
failover lan interface failover Ethernet0/3
failover link failover Ethernet0/3
failover interface ip failover 172.20.20.6 255.255.255.0 standby 172.20.20.7

and 

failover lan unit secondary
failover lan interface failover Ethernet0/3
failover link failover Ethernet0/3
failover interface ip failover 172.20.20.6 255.255.255.0 standby 172.20.20.7

Thanks again,

-Jeff


-----Original Message-----
From: Ryan West [mailto:rwest at zyedge.com] 
Sent: Thursday, June 11, 2009 4:17 PM
To: Jeff Wojciechowski
Cc: cisco-nsp at puck.nether.net
Subject: RE: ASA 5510 Configuration Replication Failure

Have you tried a crossover?  Can you post 'show run failover' ?  A console on the standby firewall might reveal something during the replication process too.

-ryan


<snipped>