[c-nsp] ASA 5510 Configuration Replication Failure

[Jeff Wojciechowski]

OK - found the REAL issue now.

My standby unit turned into a brick on me :o) I actually SAW it happen. All the link lights went out at once.

Thanks again for the help.

-Jeff

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jeff Wojciechowski
Sent: Thursday, June 11, 2009 4:24 PM
To: Ryan West
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] ASA 5510 Configuration Replication Failure

Ryan -

Solved... for now at least...

Still using straight thru cable for synch interface I upgraded to 8.21 - based on the following bug IDs:

CSCsu88174
CSCsw98373
CSCsy21727
CSCsz63217

For the record the sh run | inc fail:

failover lan unit primary
failover lan interface failover Ethernet0/3
failover link failover Ethernet0/3
failover interface ip failover 172.20.20.6 255.255.255.0 standby 172.20.20.7

and 

failover lan unit secondary
failover lan interface failover Ethernet0/3
failover link failover Ethernet0/3
failover interface ip failover 172.20.20.6 255.255.255.0 standby 172.20.20.7

Thanks again,

-Jeff


-----Original Message-----
From: Ryan West [mailto:rwest at zyedge.com] 
Sent: Thursday, June 11, 2009 4:17 PM
To: Jeff Wojciechowski
Cc: cisco-nsp at puck.nether.net
Subject: RE: ASA 5510 Configuration Replication Failure

Have you tried a crossover?  Can you post 'show run failover' ?  A console on the standby firewall might reveal something during the replication process too.

-ryan


<snipped>

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/