[c-nsp] Two events in EEM

[Eninja]

Inder,

Sounds like you're a Cisco software development engineer. Shouldn't  
this be sent to a Cisco internal list rather than a public list?

Eninja ;)



On Jun 15, 2009, at 5:57 AM, Rishi Kochar <irsk.inc at gmail.com> wrote:

> hi
> i work for cisco in UC technology.
> i am very new to EEM. I dont deal with scripting at all but i have  
> to create
> one for one of my customers
>
> I have created an event manager applet with an '
> #event syslog pattern <pattern>.
> Now after matching the pattern i want it wait for a countdown timer  
> and the
> execute certain cli commands.
> what's the easiest way to do it ?
> i think with EEM i cant make my first applet to call another applet  
> which
> has a countdown timer because with
> #action 1.0 cli command "event manager run <2nd applet>"
> in this 2nd applet should have "event none" if i need to call it  
> manually
> from 1st applet but thats not the case because 2nd applet will have a
> countdown timer as its event.
>
> any help on this would be highly appreciated
>
> thanks and regards
> inder
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/