[c-nsp] Double Natting

[Mohammad Khalil]

Thanks all for ur assist , i configured port forwarding before submitting my request but the CPE is dump i figured it later that u have to assign port range not a specific port on the CPE :)

> From: eng_mssk at hotmail.com
> To: cisco-nsp at puck.nether.net
> Date: Tue, 16 Jun 2009 15:38:58 +0300
> Subject: [c-nsp] Double Natting
> 
> 
> hey all
> i have a wimax CPE which have public IP address
> and from the LAN side it has the ip add 192.168.1.1 and its DHCP enabled
> now i have tp-link router that is connected to the CPE and got the ip address 192.168.1.100
> i connected a laptop to the router and got the ip address 192.168.2.100
> can i access the laptop via remote desktop by accessing the public ip address of the CPE ?
> 
> thanks
> 
> _________________________________________________________________
> Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy!
> http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_________________________________________________________________
Show them the way! Add maps and directions to your party invites. 
http://www.microsoft.com/windows/windowslive/products/events.aspx