[c-nsp] the ospf 0*E2 route type can not be redistributed between two ospf process

[Geoffrey Pendery]

Well if you're talking "default-information originate", then the route
in question is 0.0.0.0/0, default.  It's special - you can't just tell
an OSPF process to redistribute 0.0.0.0/0.  If you want both processes
to distribute default, then they both need the "default-information
originate" command.


-Geoff


On Thu, Jun 18, 2009 at 11:58 PM, ying-xiang<ying-xiang at 163.com> wrote:
>
> hi,folk
>
> anyone knows the reason why i can not redistribute the O*E2 route which generated by one ospf router using default-information originate command to another ospf process?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>