[c-nsp] the ospf 0*E2 route type can not be redistributedbetween two ospf process

[Ivan Pepelnjak]

See also http://wiki.nil.com/OSPF_default_routes for more details.

Best regards
Ivan
 
http://www.ioshints.info/about
http://blog.ioshints.info/ 

> -----Original Message-----
> From: Geoffrey Pendery [mailto:geoff at pendery.net] 
> Sent: Friday, June 19, 2009 2:36 PM
> To: ying-xiang
> Cc: cisco-nsp
> Subject: Re: [c-nsp] the ospf 0*E2 route type can not be 
> redistributedbetween two ospf process
> 
> Well if you're talking "default-information originate", then 
> the route in question is 0.0.0.0/0, default.  It's special - 
> you can't just tell an OSPF process to redistribute 
> 0.0.0.0/0.  If you want both processes to distribute default, 
> then they both need the "default-information originate" command.
> 
> 
> -Geoff
> 
> 
> On Thu, Jun 18, 2009 at 11:58 PM, 
> ying-xiang<ying-xiang at 163.com> wrote:
> >
> > hi,folk
> >
> > anyone knows the reason why i can not redistribute the O*E2 
> route which generated by one ospf router using 
> default-information originate command to another ospf process?
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> 
>