[c-nsp] SNMP MIB for EVC monitoring (Ruzhanskaya Olga)

[Tassos Chatzithomaoglou]

We're monitoring the traffic of service instances (under SRD2) just like the traffic of 
subinterfaces, ifInOctets/ifOutOctets, etc (in the latest IF-MIB, service instances are 
represented as subinterfaces and associated with an ifIndex).

No issues so far, except that we can't configure the bandwidth of service instances 
through the cli.

--
Tassos

????? ????????? wrote on 23/06/2009 16:29:
> Hello List!
>  
> In our MPLS network we are planning to deploy "scalable EoMPLS" instead of "EoMPLS based on PFC (subinterfaces)".
> For example, we had:
>   interface gigabitethernet <ID>.subint
>    encapsulation dot1q <vlanID>
>    xconnect <remote loopback> <VC ID> encapsulation mpls
> 
> and we want to deploy:
>    interface gigabitethernet <ID>.
>      service instance <ID> ethernet
>      encapsulation dot1q <vlanID>
>      rewrite ingress tag pop 1 symmetric
>      xconnect <remote loopback> <VC ID> encapsulation mpls
>  
> 
> The main platform - 7600 (RSP720), IOS 12.2(33)SRC4.
> Currently, there is no CISCO-EVC-MIB support for this IOS, and we have no opportunity to test other IOS (SRD, for example) on production network.
> 
> So, the question: does anyone have already tried to monitor the traffic load via these MIB (CISCO-EVC-MIB )? Or maybe there are other ways?
> 
> 
> Best regards, 
> Olga
> 
>  
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

-- 
Tassos