[c-nsp] no negotiation on the ASR

[Brian Spade]

Hi,

I need to move a link tonight from a 6500 to an ASR.  This link requires no
negotiation per the carrier.  On the 6500, this is currently configured --
"speed nonegotiate".

However, the ASR does not have this option:

tk-rtr1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
tk-rtr1(config)#int gig0/0/3
tk-rtr1(config-if)#no shut

tk-rtr1(config-if)#speed ?
% Unrecognized command

tk-rtr1(config-if)#negotiation ?
  auto  Perform link autonegotiation

Am I mistaken that the ASR can't do this??

Thanks,
/bs