[c-nsp] Reload without confirmation

David Freedman david.freedman at uk.clara.net
Wed Jun 24 15:38:57 EDT 2009


yes, I have tried with v2, the 800 series simply does *not* support remote SNMP reloads despite 
having the command in place, I can happily perform this on an 7200 just not an 800 series,
tried 12.4(15)T and 12.4(20)T ADVIPSERVICES.

$ snmpset -v2c -c private 10.0.0.2 1.3.6.1.4.1.9.2.9.9.0 i 2
Error in packet.
Reason: noCreation (That table does not support row creation or that object can not ever be created)
Failed object: SNMPv2-SMI::enterprises.9.2.9.9.0

Router#sh run | in snmp
snmp-server community private RW
snmp-server system-shutdown



------------------------------------------------
David Freedman
Group Network Engineering 
Claranet Limited
http://www.clara.net



-----Original Message-----
From: A.L.M.Buxey at lboro.ac.uk [mailto:A.L.M.Buxey at lboro.ac.uk]
Sent: Wed 6/24/2009 19:06
To: David Freedman
Cc: Brian Turnbow; Cisco-nsp; Jared Mauch
Subject: Re: [c-nsp] Reload without confirmation
 
Hi,

> $ snmpset -v2c -c private 10.0.0.2 1.3.6.1.4.1.9.2.9.9.0 i 2
> Error in packet.
> Reason: noCreation (That table does not support row creation or that
> object can not ever be created)
> Failed object: SNMPv2-SMI::enterprises.9.2.9.9.0

hmmm, wonder if you've got some SNMP ACLs or community problem? thats
the correct command and MIB (having had to do remote reloads a few times
using SNMP)

alan



More information about the cisco-nsp mailing list