[c-nsp] Odd request to anyone who has a switch capable of EoMPLS

[David Hughes]

On 28/02/2009, at 12:15 AM, Jason Lixfeld wrote:

> I need to know whether or not a switch port from a 6500/7600 or  
> ME6500 (or any other switch series that does EoMPLS) that is  
> configured for EoMPLS (xconnect <vc> <IP>) still transmits STP BPDUs  
> while the EoMPLS tunnel is up (or down for that matter).

On Cat6k you can only configure EoMPLS xconnects on a layer 3  
interface, not a switch port..  Any BPDUs you get are from the other  
end of the VC.


Thanks

David
...