[c-nsp] Cisco 7600 Router's Default IPSec Throughput Rate

[Peter Rathlev]

On Thu, 2009-03-05 at 10:25 +0200, Serhat Candan wrote:
> Thanks for reply. I checked the topic it is about IOS support, i need
> some charts about IPSec throughput, pps etc.

Then read the thread once more. :-)

If it is not supported the throughput you can rely on is exactly 0. If
you need IPSec for other than management purposes (or on SR) you need an
IPSec SPA.

Regards,
Peter