[c-nsp] Cisco 7600 Router's Default IPSec Throughput Rate

[Serhat Candan (Probil - İstanbul)]

Thank you so much :)

Regards,

Serhat

-----Original Message-----
From: Peter Rathlev [mailto:peter at rathlev.dk] 
Sent: 05 Mart 2009 Perşembe 12:57
To: Serhat Candan (Probil - İstanbul)
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Cisco 7600 Router's Default IPSec Throughput Rate

On Thu, 2009-03-05 at 10:25 +0200, Serhat Candan wrote:
> Thanks for reply. I checked the topic it is about IOS support, i need
> some charts about IPSec throughput, pps etc.

Then read the thread once more. :-)

If it is not supported the throughput you can rely on is exactly 0. If
you need IPSec for other than management purposes (or on SR) you need an
IPSec SPA.

Regards,
Peter