[c-nsp] Cisco Dial-Plan Assistance

Brad Henshaw brad.henshaw at qcn.com.au
Thu Mar 5 20:04:23 EST 2009


Gregory Boehnlein wrote: 

> I have a few Cisco 2600s configured as PRI gateways...
> So the call flow that I'm looking for is:
> Carrier PRI -> Cisco -> Asterisk Server -> Cisco -> Customer PBX

You need to give the VOIP dial-peer a lower preference:

dial-peer voice 2000 voip
 preference 1
dial-peer voice 1000 pots
 preference 2

Alternatively you might be able to use trunkgroups and the associated
preference parameter but I'm not sure that will work with VoIP/SIP
peers.

Regards,
Brad


More information about the cisco-nsp mailing list