[c-nsp] T3 fixed when cables are reseated..

[Gert Doering]

Hi,

On Wed, Mar 11, 2009 at 11:23:43PM -0400, Richey wrote:
> I unplugged the TX cable and plugged it in and then the same with the RX
> cable.   I went back checked the T3 and all of the T1s were backup.    Has

We've seen this on E3s and T3s every now and then.

No idea why, though.

My theory is that "a good old loss-of-signal" will reset all framers etc
involved, and enable re-synchronization.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 304 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20090312/381826a0/attachment.bin>