[c-nsp] PBR/VRF sanity check...

Tony td_miles at yahoo.com
Thu Mar 12 22:45:55 EDT 2009


Hi Jeff,

I've tested both PBR & VRF on a 3550 with extended match routing SDM. It works, but adding VRF's when using PBR forced it to use software/CPU instead of hardware/ASIC forwarding.

This caused max PBR + VRF throughput to be just over 30Mbps with 100% CPU.

Don't know about the higher end platforms you've mentioned.


regards,
Tony.

--- On Fri, 13/3/09, Jeff Kell <jeff-kell at utc.edu> wrote:

> From: Jeff Kell <jeff-kell at utc.edu>
> Subject: [c-nsp] PBR/VRF sanity check...
> To: "'NSP List'" <cisco-nsp at puck.nether.net>
> Date: Friday, 13 March, 2009, 1:20 PM
>
> Aren't PBR and VRF mutually exclusive
> on all Catalysts, or are they possible concurrently on a
> 4500 or 6500?
> 
> Jeff
>


      



More information about the cisco-nsp mailing list