[c-nsp] Cisco ACL Manager 1.6 Broke after enable MPLS

schilling schilling2006 at gmail.com
Fri Mar 13 10:48:28 EDT 2009


Hi All,

We had ACL manager 1.6 managing ACLs on our Catalyst 6500. We recently
enabled MPLS on some of our core switches, ACL manger now will not open the
device. The error is "Exception while getting device attributes: IDL
AclmModule/AclmException:1.0".

We only did the following in terms of MPLS.

int loopback10
 description MPLS-LDP-ID
 ip address 192.168.253.5 255.255.255.255

ip access-list standard mpls-loopbacks-only
 permit 192.168.253.0 0.0.0.63
 permit any
exit
mpls label protocol ldp
mpls ldp router-id loopback10 force
no mpls ldp advertise-labels
mpls ldp advertise-labels for mpls-loopbacks-only

Then enabled mpls ip on backbone vlans.

I sniffed the traffic of working one, ACL manager is using snmp and tftp to
change the router configuration in our environment.

Could somebody give some insight on this?

Thanks.

Schilling


More information about the cisco-nsp mailing list