[c-nsp] Cisco 7600: unsupported module

[Ian Cox]

Your running a non-wan image. You need a wan image to support this card.


Ian

Asheesh Jadav wrote:
> Hi,
> 
>   I have an OSM-2+4GE-WAN+ Line blade that I'm trying to use on a 7600
> chassis but it wont power up. Any help as to why it doesn't? The Cisco
> website seems to claim that the software I'm running should support this
> Line card.
> 
> Here is the error message that I see:
> 
> *Sep 10 06:46:35.347: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot
> 3, power not allowed: Not Supported.
> 
> 
> and here is what I have:
> 
> Mod Ports Card Type                              Model              Serial
> No.
> --- ----- -------------------------------------- ------------------
> -----------
>   3    2  2+4 port GE-WAN                        OSM-2+4GE-WAN+
> JAB092500TX
>   5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B
> SAL1208GKQA
> 
> Mod MAC addresses                       Hw    Fw           Sw
> Status
> --- ---------------------------------- ------ ------------ ------------
> -------
>   3  0012.7f08.46c0 to 0012.7f08.46cf   2.2   Unknown      Unknown
> PwrDown
>   5  0017.9444.2688 to 0017.9444.268b   5.3   8.5(2)       12.2(33)SRB5 Ok
> 
> Mod  Sub-Module                  Model              Serial       Hw
> Status
> ---- --------------------------- ------------------ ----------- -------
> -------
>   5  Policy Feature Card 3       WS-F6K-PFC3B       SAL1126W66V  2.2    Ok
>   5  MSFC3 Daughterboard         WS-SUP720          SAL1126W66E  2.3    Ok
> 
> Mod  Online Diag Status
> ---- -------------------
>   3  Not Applicable
>   5  Pass
> Router>
> Router>
> Router>show ver
> Cisco IOS Software, c7600s72033_rp Software
> (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB5, RELEASE SOFTWARE
> (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2008 by Cisco Systems, Inc.
> Compiled Wed 05-Nov-08 19:24 by prod_rel_team
> 
> ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
> 
>  Router uptime is 31 minutes
> Uptime for this control processor is 31 minutes
> Time since Router switched to active is 30 minutes
> System returned to ROM by reload (SP by reload)
> System image file is
> "bootdisk:c7600s72033-advipservicesk9-mz.122-33.SRB5.bin"
> Last reload type: Normal Reload
> 
> 
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
> 
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
> 
> If you require further assistance please contact us by sending email to
> export at cisco.com.
> 
> cisco CISCO7606-S (R7000) processor (revision 1.0) with 458720K/65536K bytes
> of memory.
> Processor board ID FOX1231GPVB
> SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
> Last reset from s/w reset
> 1 Virtual Ethernet interface
> 6 Gigabit Ethernet interfaces
> 1917K bytes of non-volatile configuration memory.
> 8192K bytes of packet buffer memory.
> 
> 65536K bytes of Flash internal SIMM (Sector size 512K).
> Configuration register is 0x2102
> 
> Router>
> 
> 
> Thanks in Advance.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>