[c-nsp] Cisco 7600: unsupported module

Asheesh Jadav ajadav at gmail.com
Wed Mar 18 16:13:47 EDT 2009


  I have an OSM-2+4GE-WAN+ Line blade that I'm trying to use on a 7600
chassis but it wont power up. Any help as to why it doesn't? The Cisco
website seems to claim that the software I'm running should support this
Line card.

Here is the error message that I see:

*Sep 10 06:46:35.347: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot
3, power not allowed: Not Supported.

and here is what I have:

Mod Ports Card Type                              Model              Serial
--- ----- -------------------------------------- ------------------
  3    2  2+4 port GE-WAN                        OSM-2+4GE-WAN+
  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B

Mod MAC addresses                       Hw    Fw           Sw
--- ---------------------------------- ------ ------------ ------------
  3  0012.7f08.46c0 to 0012.7f08.46cf   2.2   Unknown      Unknown
  5  0017.9444.2688 to 0017.9444.268b   5.3   8.5(2)       12.2(33)SRB5 Ok

Mod  Sub-Module                  Model              Serial       Hw
---- --------------------------- ------------------ ----------- -------
  5  Policy Feature Card 3       WS-F6K-PFC3B       SAL1126W66V  2.2    Ok
  5  MSFC3 Daughterboard         WS-SUP720          SAL1126W66E  2.3    Ok

Mod  Online Diag Status
---- -------------------
  3  Not Applicable
  5  Pass
Router>show ver
Cisco IOS Software, c7600s72033_rp Software
(c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB5, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 05-Nov-08 19:24 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)

 Router uptime is 31 minutes
Uptime for this control processor is 31 minutes
Time since Router switched to active is 30 minutes
System returned to ROM by reload (SP by reload)
System image file is
Last reload type: Normal Reload

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found

If you require further assistance please contact us by sending email to
export at cisco.com.

cisco CISCO7606-S (R7000) processor (revision 1.0) with 458720K/65536K bytes
of memory.
Processor board ID FOX1231GPVB
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
6 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102


Thanks in Advance.

More information about the cisco-nsp mailing list