[c-nsp] Sup720-3BXL and diag issues

[Jimmy Changa]

I have three chassis with the same SUP and IOS revisions. 1 chassis seems to
fail the cards, the other 2 seem to have no problems with them.

I will reboot the problematic 6500 during a maintenance window.

On Thu, Mar 19, 2009 at 2:06 PM, Bob Snyder <rsnyder at toontown.erial.nj.us>wrote:

> On Wed, Mar 18, 2009 at 3:34 PM, Jimmy Changa <jimmy.changa007 at gmail.com
> >wrote:
>
> > Seems that all cards and in all slots seem to fail. Again, the same cards
> > work fine else were.
>
>
> Same version of IOS on this box as elsewhere? We've seen issues with
> linecards "failing" on an upgrade of 7600 code that are "fixed" if you fall
> back to the previous code. Cisco's stance is that they are in fact bad
> cards
> that the new diag tests or improved existing diag tests in the new IOS
> discovered, so we RMA'ed the cards.
>
> This problem is probably not the issue if you've tried multiple cards as is
> implied, but in case you hadn't...
>
> Bob
>  _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>