[c-nsp] Cisco PIX Boot Error

[Ibrahim Alsharif]

Hello Dears,
I'm facing a problem with Cisco PIX 515E, when I do reload on it it goes to the Monitor Mode although there is an image file in the flash memory.
and the Boot Variable pointing to it.
also when I do upload new Image by TFTP it's working but when I reload it, same Issue (Monitor Mode)
please help me if u have any idea

here is the show version

sh ver
Cisco PIX Security Appliance Software Version 8.0(4) 
Compiled on Thu 07-Aug-08 19:42 by builders
System image file is "Unknown, monitor mode tftp booted image"
Config file at boot was "flash:/startup-config"
cisco-pix up 30 secs
Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
0: Ext: Ethernet0 : address is 000b.fd19.93f9, irq 10
1: Ext: Ethernet1 : address is 000b.fd19.93fa, irq 11
2: Ext: Ethernet2 : address is 0005.5d18.390d, irq 11
3: Ext: Ethernet3 : address is 0005.5d18.390e, irq 10
4: Ext: Ethernet4 : address is 0005.5d18.390f, irq 9
5: Ext: Ethernet5 : address is 0005.5d18.3910, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 6 
Maximum VLANs : 25 
Inside Hosts : Unlimited 
<--- More --->
Failover : Active/Active
VPN-DES : Enabled 
VPN-3DES-AES : Enabled 
Cut-through Proxy : Enabled 
Guards : Enabled 
URL Filtering : Enabled 
Security Contexts : 2 
GTP/GPRS : Disabled 
VPN Peers : Unlimited 
This platform has an Unrestricted (UR) license.
Serial Number: 807031324
Running Activation Key: 0xcf034f76 0x78b40c51 0xa00275f4 0x865440e0 0x0601ca9e 
Configuration has not been modified since last system restart.
cisco-pix# 
 
 
Thank you
Ibrahim Alsharif