[c-nsp] How to apply individual QoS policies to on an ingress Interface?

[Andy Saykao]

Thanks Pelle for the link.

>From that link, I took a look at "Configuring MQC Support for IP
Sessions" but the IOS I am using c7301-a3jk91s-mz.122-31.SB13.bin
doesn't support the command to apply the service policy to.

http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_mqc_ipse
ssion_ps6922_TSD_Products_Configuration_Guide_Chapter.html

Router(config-pmap-c)# policy-map type service PREMIUM_SERVICE
Router(config-service-policymap)# service-policy input PREMIUM_MARK_IN
<-- not supported
Router(config-service-policymap)# service-policy output PREMIUM_UB_OUT
<-- not supported

Might just take the simple route and configure separate class-maps and
policy-maps for each customer. At present we only have a handful
customers that we need to rate limit.

Cheers.

Andy

This email and any files transmitted with it are confidential and intended
 solely for the use of the individual or entity to whom they are addressed. 
Please notify the sender immediately by email if you have received this 
email by mistake and delete this email from your system. Please note that
 any views or opinions presented in this email are solely those of the
 author and do not necessarily represent those of the organisation. 
Finally, the recipient should check this email and any attachments for 
the presence of viruses. The organisation accepts no liability for any 
damage caused by any virus transmitted by this email.