[c-nsp] Sup720 Errors - Revisited

[Paul Stewart]

Hi folks.

 

I posted about this before and was told it was either bad memory or bad sup
cards.. Have a pair of 7606's with sup720-3bxl . these errors occur on one
system and not the other.  To top it off, we got these same errors showing
up a couple of times now on 6509 with sup2/msfc2 recently..

 

May  9 07:16:21: %SYSTEM_CONTROLLER-SP-STDBY-3-ERROR: Error condition
detected: TM_DATA_PARITY_ERROR

May  9 07:16:21: %SYSTEM_CONTROLLER-SP-STDBY-3-EXCESSIVE_RESET: System
Controller is getting reset so frequently

 

Both 7606 chassis are running 12.2(33)SRA7 and this also occurred when they
were running SXF train.   We have many 6500's and only one of them so far
has exhibited the same errors and it is running 12.2(18)SXF16 

 

Just looking for thoughts. we swapped spare supervisors between the 7600
showing issues and the one that doesn't log any errors, kicked it over and
still see these issues.. Bad chassis??

 

Are these errors critical in nature or more just informative?

 

Thanks for your time,

 

Paul