[c-nsp] How to improve C3750G switch uplink speed?

masood at nexlinx.net.pk masood at nexlinx.net.pk
Tue May 12 06:52:22 EDT 2009

You are using this port for UPLINK, and it could be a trunk port. I
strongly suggest you should not use portfast on this port. This way you
can avoid loops and 30 second wait will be worth it.

Blog: http://weblogs.com.pk/jahil/

> Hi,
> When I plug wire into c3750g port, it would wait about "30sec" then
> change to uplink status.
> Are there any method can cut down uplink time?
> Regards,
> Pigsign
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list