[c-nsp] About Multihoming

Daryl G. Jurbala daryl at introspect.net
Sun May 17 10:06:28 EDT 2009

Multihoming is not always about redundancy, and the most likely point  
of failure is not always your own router.  It is often something much  
more expensive, like your power.

On May 13, 2009, at 4:06 PM, Robert Maier wrote:

> but if you are using Multihoming, only one router is single point of  
> failure.
> So in the most cases you would use 2 routers with HSRP to the LAN side

More information about the cisco-nsp mailing list