[c-nsp] Cat 6500 (IOS) dhcp Client

Dan Benson dbenson at swingpad.com
Fri May 22 12:09:10 EDT 2009

Safe to assume I am up the river on this one then?  Thanks. //db

>> As strange as this sounds, I have a need to be assigned an address  
>> on a Cat6500 Running IOS via dhcp (to a vlan or a dedicated port).   
>> On most routers running IOS the command syntax is, "ip address  
>> dhcp" as just about anyone knows but on the sups running IOS  
>> (tested sup1a-ge/MSFC1, sup2 and sup720s) I have not found a way to  
>> be assigned an address.
>> I can only assume this is because no one in their right mind would  
>> ever do this on this platform but my install is requiring such.    
>> Before I try a flexwan with a PA-FE in it has anyone out there had  
>> this issue and if so would you be so kind to pass along a solution  
>> if there is one.
>> Thanks in advance for the time and help. //db

More information about the cisco-nsp mailing list