[c-nsp] Cat 6500 (IOS) dhcp Client

Dale Shaw dale.shaw+cisco-nsp at gmail.com
Fri May 22 20:10:24 EDT 2009


Hi Dan,

On Sat, May 23, 2009 at 2:09 AM, Dan Benson <dbenson at swingpad.com> wrote:
> Safe to assume I am up the river on this one then?  Thanks. //db

The command lookup tool [1] suggests the 'ip address dhcp' command is
available in 12.2SX and 12.2SR trains, but it "depends on your feature
set, platform, and platform hardware"

Have a play around with the feature navigator tool [2], using the
"DHCP Client" feature and your specific platform(s) and IOS as
filters. Sometimes Feature Navigator tells lies, but generally steers
you in the right direction :-)

cheers,
Dale

[1] http://tools.cisco.com/Support/CLILookup/cltSearchAction.do
[2] http://www.cisco.com/go/fn


More information about the cisco-nsp mailing list