[c-nsp] Cat 6509 Power supplies

Nicolas Rolans nicolas.rolans at gmail.com
Tue May 26 16:06:51 EDT 2009


Hi,

Here's another example. It's a 6509-E almost fully loaded.

#show power
system power redundancy mode = redundant
system power total =     2331.00 Watts (55.50 Amps @ 42V)
system power used =      1259.16 Watts (29.98 Amps @ 42V)
system power available = 1071.84 Watts (25.52 Amps @ 42V)
                        Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    WS-CAC-2500W       2331.00 55.50  OK     OK     on
2    WS-CAC-2500W       2331.00 55.50  OK     OK     on
                        Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    WS-C6509-E-FAN      150.36  3.58  OK
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1    WS-X6548-GE-TX      125.16  2.98   125.16  2.98  on    on
2    WS-X6548-GE-TX      125.16  2.98   125.16  2.98  on    on
3    WS-X6548-GE-TX      125.16  2.98   125.16  2.98  on    on
4    WS-X6548-GE-TX      125.16  2.98   125.16  2.98  on    on
5    WS-SUP720-BASE      315.00  7.50   315.00  7.50  on    on
7    WS-X6548-GE-TX      125.16  2.98   125.16  2.98  on    on
8    WS-X6408-GBIC        84.00  2.00    84.00  2.00  on    on
9    WS-X6408-GBIC        84.00  2.00    84.00  2.00  on    on


More information about the cisco-nsp mailing list