[c-nsp] FABRIC-3-ERR_HANDLE

[e ninja]

Antonio,

You should *never* troubleshoot fabric errors with *any* exec-on commands.
They run over the fabric that may or may not be compromised.

   1. Are any other LCs apart from slot 6 reporting CRC errors?
   2. grab two "sh contr fia" from the RP and an attach to all the LCs and
   send over.

Eninja


On Mon, Nov 16, 2009 at 4:15 AM, Antonio Soares <amsoares at netcabo.pt> wrote:

> Hello group,
>
> I have a 12k reporting this:
>
> %FABRIC-3-ERR_HANDLE: Reconfigure LC on fabric due to CRC error from slot 6
>
> In one week, i have 4 of these messages.
>
> Slot 6 is a SIP-601 containing 2 x SPA-10G.
>
> What could be the problem ?
>
> The "show controllers fia" do not show any problem.
>
> The "execute-on slot 6 show controllers fia" show this:
>
> Switch cards present: 0x1F
> Switch cards monitored: 0x1F
>          0          1          2          3          4
>       --------   --------   --------   --------   --------
> los    0          0          0          0          0
> state  Off        Off        Off        Off        Off
> crc16  53989      0          0          0          0
> xor error0          0          0          0
> cell drops1020       1020       1020       1020
>
>
> IOS=c12kprp-p-mz.120-32.SY6.bin
>
>
> Thanks.
>
> Regards,
>
> Antonio Soares, CCIE #18473 (R&S)
> amsoares at netcabo.pt
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>