[c-nsp] Coax E1 over IP

[Jay Hennigan]

Peter Rathlev wrote:
> On Thu, 2009-11-19 at 13:23 +0100, Aled Morris wrote:
>> Have you looked at NM-CEM-4TE1 for the 2800?
> 
> I've looked briefly at it, but it only seems to have RJ45 connectors[1],
> not BNC for coax. Otherwise it seems to fit the purpose.
> 
> What can one do to take an E1 circuit from coax?

Use the Cisco part number CAB-E1-RJ45BNC= or generic equivalent to 
connect to the RJ-45 on the router and the BNC connectors on the E1 
smartjack.


-- 
--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV