[c-nsp] Ethernet autonegotiation issue between Cat3560 and Cat2960

[Nick Hilliard]

On 22/11/2009 16:52, Juuso Lehtinen wrote:
> Cables straight-thru, and identical cables are used for the working and
> suspended trunks.
>
> I will try replacing the cable with a new one tomorrow. If that does not
> help, will try disabling autonegotiation.

If you disable autonegotiation, you will need to use a GE cross-over cable, 
as disabling speed negotiation on a cisco switch usually (but not always) 
disables mdi/mdix negotiation.

Nick