[c-nsp] Ethernet autonegotiation issue between Cat3560 and Cat2960

[Pavel Skovajsa]

Hi,

I would approach this the indirect way - try shuffling the switches
around to see which combinations work & which not. This is the
"universal engineer" approach :)

-pavel skovajsa

On Sun, Nov 22, 2009 at 11:17 PM, Daniele Orlandi <daniele at orlandi.com> wrote:
> On Sunday 22 November 2009 18:28:07 Nick Hilliard wrote:
>>
>> If you disable autonegotiation, you will need to use a GE cross-over cable,
>
> I don't think so, because with GE there are no RX and TX pairs to be crossed
> as all four pairs are both for transmission and reception.
>
> --
>  Daniele "Vihai" Orlandi
>  Bieco Illuminista #184213
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>