[c-nsp] Identifying the modem based off of cpe ip

[florin at futurefreedom.ro]

Hey,

Just do a show cable modem cpe_ip. It works on ubr72xxvxr and ubr10k.

------Original Message------
From: D.J. O'Berry
Sender: cisco-nsp-bounces at puck.nether.net
To: 'Cisco-nsp'
ReplyTo: doberry at zcorum.com
Subject: [c-nsp] Identifying the modem based off of cpe ip
Sent: Nov 23, 2009 17:04

Hello all,

I'm writing in to ask this. I know that you can run a sho cable modem 
(ip of modem) to look at a specific modem on a Cisco. What I'm looking 
for is a way to show a modem based off of the cpe ip/mac behind it. I 
know that older 3com and Terayon Bluewaves had this option in their code.

-- 
D.J. O'Berry
Network Design Engineer
ZCorum
866-467-9791 ext 7041
doberry at zcorum.com

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


Sent from my BlackBerry® wireless device