[c-nsp] Identifying the modem based off of cpe ip

[D.J. O'Berry]

Thanks.

Never seen that in the command list of options, so never thought Cisco 
could do it.

florin at futurefreedom.ro wrote:
> Hey,
>
> Just do a show cable modem cpe_ip. It works on ubr72xxvxr and ubr10k.
>
> ------Original Message------
> From: D.J. O'Berry
> Sender: cisco-nsp-bounces at puck.nether.net
> To: 'Cisco-nsp'
> ReplyTo: doberry at zcorum.com
> Subject: [c-nsp] Identifying the modem based off of cpe ip
> Sent: Nov 23, 2009 17:04
>
> Hello all,
>
> I'm writing in to ask this. I know that you can run a sho cable modem 
> (ip of modem) to look at a specific modem on a Cisco. What I'm looking 
> for is a way to show a modem based off of the cpe ip/mac behind it. I 
> know that older 3com and Terayon Bluewaves had this option in their code.
>
>   

-- 
D.J. O'Berry
Network Design Engineer
ZCorum
866-467-9791 ext 7041
doberry at zcorum.com