[c-nsp] Metro Ethernet Switches

[Mohammad Khalil]

hi justin

thanks for the reply
actually i figured out what was the issue 
it was due to entering 0 (unencrypted) or 7 (encrypted) :

> Date: Tue, 24 Nov 2009 17:11:17 -0600
> From: justin at justinshore.com
> To: BBlackford at nwresd.k12.or.us
> CC: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Metro Ethernet Switches
> 
> Bill Blackford wrote:
> > I recall having some of my aaa config options slightly changing syntax after upgrading. Sounds like you've verified this, but it may be worth double-checking.
> 
> I highly recommend using a tool like RANCID to keep an eye on config 
> changes, especially during upgrades.  I didn't bother to check the 
> RANCID diff when I did an upgrade over the weekend and discovered a 
> problem yesterday (see NTP thread from yesterday).  Had I stayed up and 
> reviewed the email notice I would have found the problem much sooner. 
> At the very least get a copy of Kiwi CatTools and run it before and 
> after an upgrade.  It's a good sanity check.
> 
> Justin
> 
> 
> 
> 
 		 	   		  
_________________________________________________________________
Windows Live: Keep your friends up to date with what you do online.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010