[c-nsp] Cisco 12416 Power Management

[Antonio Soares]

Hello Oliver,

Any possibilities of 12.0(32)SY6 being affected too ?

12k2>sh ver | inc IOS
IOS (tm) GS Software (C12KPRP-P-M), Version 12.0(32)SY6, RELEASE SOFTWARE (fc2)
12k2> 

Because the Bug you mentioned is exactly what i have:

12k2>sh diag

(...)
PEM  1  (AC_PWR_1): Failsafe PS [Failsafe-PEM=]
PEM  2  (AC_PWR_2): No PEM present
PEM  3  (AC_PWR_3): No PEM present
12k2>


Thanks.

Regards,

Antonio Soares, CCIE #18473 (R&S)
amsoares at netcabo.pt

-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
Sent: quarta-feira, 14 de Outubro de 2009 15:23
To: Antonio Soares; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Cisco 12416 Power Management

 
> 
> I'm trying to figure out why i have this output:
> 
> ++++++++++++++++++++++++++++++++++++++++++++++
> 12k2>sh env power_supply
> 
> Failsafe power system
> 
> Slot #          48V     AMP_48
>                 (Volt)  (Amp)
> 27      PEM1    53      10      Failsafe-PEM=   Failsafe PS
 
this looks like CSCsk88926 (PEMS appear in Failsafe Mode during IOS image upgrade or power cycle), duplicate of CSCsj91286 fixed in
12.0(32)SY5 and 12.0(32)S9. Which release do you run? Only 12.0(32)SY3 and 12.0(32)S6 should be affected..

	oli