[c-nsp] Catalyst 4500/Sup5 - carrier-delay supported?

Clinton Work clinton at scripty.com
Mon Sep 14 16:13:17 EDT 2009


I opened a TAC case and they confirmed after research with a DE that the 
"carrier-delay msec 100" interface command is configurable, but it 
doesn't do anything.  If your 4500 linecards don't have support for the 
port debounce capability then your out of luck. 

Clinton. 

Clinton Work wrote:
>
> I'm trying to figure out of the Catalyst 4500s running Sup5 with IOS 
> 12.2SG support the carrier-delay command. The interface capabilities 
> show that the old Catalyst link debounce feature isn't supported on 
> WS-X4306 GigE interfaces , however the switch allows you to configure 
> carrier-delay.  For example:



More information about the cisco-nsp mailing list