[c-nsp] Problems creating a new BGP neighbor

[Chris Mason (chrimaso)]

Hi Mihai,

Check out CSCsz68307 - this occurs when someone attempts to configure an invalid IP address as a BGP peer - after that you are unable to create any additional peers as you get the error message "*% Create the peer-group first".

To resolve the problem you either need to reload the box or configure "no parser cache" - the latter being more preferable.

Hope that helps,
Chris

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mihai Campean
Sent: 14 September 2009 14:34
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Problems creating a new BGP neighbor

Hi,
today I tried to create a new bgp neighbor, and the following message 
was prompted:
router1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
router1(config)#router bgp 1235
router1(config-router)#neighbor 1.2.3.5 remote-as 1235
*% Create the peer-group first

*Has anyone encountered this?
The machine is a 7600 series router, running Cisco IOS Software, 
c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICES-M), Version 
12.2(33)SRC1, RELEASE SOFTWARE (fc1)
Any ideea if this is a known BUG, and if there is some command on the 
IOS that forces you to add a new neighbor to a peer-group?
Thanks,

-- 
Best regards,

----------
Mihai Campean


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 821 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20090915/8e2e117b/attachment.bin>