[c-nsp] 2950 issues - Link comes UP only after reboot - Wimax

[Frank Bulk]

Did it go into err-disable?

Frank

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ved Labs
Sent: Wednesday, September 16, 2009 2:14 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 2950 issues - Link comes UP only after reboot - Wimax

Observing starnge problem in WS-C2950G-24-EI switches.
The link goes down and does not comes up .

Link cames up only , when the switch is rebooted manually.
change patch cord and change Gibic module does not help

UDLD messages are observed . but after the reboot , the switch becomes OK.

Thanks,
Biddu.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/