[c-nsp] 12.2(18)SXD to 12.2(33)SRB|C|D

[Kevin Loch]

Jason Lixfeld wrote:

> 3- There is one device on the network (an ASR1002 running 2.4.0) that is 
> unable to see the loopback address via OSPF from this 7600 we just 
> upgraded.  It's built an adjacency with the 7600, so it's not an MTU 
> thing, it just doesnt see the route for it's loopback interface. 

Make sure the ospf network mode on the interface (ip ospf network
broadcast/point-to-point etc) is set correctly and to match the
neighbor settings.

- Kevin